NAT32 is a software that turns a PC with Windows (95 or more!) In a real router, without interfering with the communications with the outside of the PC (as it is very likely to occur using the Linux iptables). This is the only software that allows you to do this under Windows. The configuration is completely driven and you can start the tool from the command line.
Following is a brief guide to set it up easily and quickly:
1 - install the software, the default directory is C: \\ nat32. E 'must also install the network protocol NDIS3PKT in a card - will be replicated in all;
2 - NAT_CFG start to use the configuration wizard. It 'important to select at least one card with the private attribute and another attribute with the Internet (90% of the reasons for using this tool is to distribute the Internet connection);
3 - after completion of the wizard configuration files have been stored in the folder of NAT32. When you restart it is necessary only to start the tool.
For the initial batch (note that it is a shareware tool and stop doing the routing after 2 hours, can not register it as a service until you buy) is sometimes necessary NAT32 start with some 'delay to the opening of the network (especially if it's WiFi). The following script allows to start the tool with a delay of 120 seconds
choice / n / t: c, 120 / c: cc
C: \\ nat32 \\ nat32 2
The first statement is used to wait 2 minutes, while the second NAT32 starts with two network cards. Just copy it into a *. cmd file and put it in startup.
0 comments:
Post a Comment